Skip to main content

Pairing Bluetooth Headset

This document outlines the process, specifically, for pairing a Sangoma phone with one of the standard supplied MPOW headsets.

On The Sangoma Phone
  1. Press the Menu button on the bottom right of the main display screen

    image-1551136015506.png

  2. Use the arrow navigation panel to navigate to the Settings option, and press Enter (or the check mark button in the center of the navigation arrow keys)

    image-1551136024578.png

  3. Select Basic Settings and press Enter

    image-1551136034870.png

  4. Navigate down to the Bluetooth menu option and press Enter

    image-1551136044466.png

  5. On this screen, if the phone says that bluetooth is on, follow the next sub-steps, otherwise skip to step 6
    1. Press the Switch option to turn bluetooth on
    2. Press the Save button to ensure that bluetooth is on

      image-1551136190680.png

    3. Press the Back button to return to the menu screen and action the save
    4. Select the Bluetooth menu option
  6. On your headset, press and hold the bluetooth activation button until the indicator light begins to flash blue/red

    image-1551136877484.png image-1551140605451.png

  7. Select option #2 Paired Bluetooth Device and press the Scan button on the bottom of the phone screen 

    image-1551136273634.png

  8. The phone will look for any bluetooth devices looking to pair. An MPOW device should show up.
  9. Press the Connect button on the bottom right of the phone

    image-1551136307769.png

  10. When you return to the main screen, the phone should now indicate that there is a bluetooth device connected

    image-1551136345940.png

You also need to ensure that you have activated headset mode on your phone. This is done by pressing the image-1551136659599.png button on the phone

 

Back to top