Pairing Bluetooth Headset

This document outlines the process, specifically, for pairing a Sangoma phone with one of the standard supplied MPOW headsets. 
 On The Sangoma Phone 
 
 Press the Menu button on the bottom right of the main display screen 
 
 Use the arrow navigation panel to navigate to the  Settings option, and press Enter (or the check mark button in the center of the navigation arrow keys) 
 
 Select  Basic Settings  and press  Enter 
 
 
 Navigate down to the Bluetooth  menu option   and press  Enter 
 
 On this screen, if the phone says that bluetooth is on, follow the next sub-steps, otherwise skip to step 6
 
 Press the  Switch option to turn bluetooth on 
 Press the  Save  button to ensure that bluetooth is on 
 
 Press the  Back  button to return to the menu screen and action the save 
 Select the  Bluetooth  menu option 
 
 
 
 On your headset, press and hold the bluetooth activation button until the indicator light begins to flash blue/red   
 
 Select option #2  Paired Bluetooth Device and press the  Scan button on the bottom of the phone screen  
 
 The phone will look for any bluetooth devices looking to pair. An MPOW device should show up. 
 Press the  Connect  button on the bottom right of the phone 
 
 When you return to the main screen, the phone should now indicate that there is a bluetooth device connected 
 
 
 You also need to ensure that you have activated headset mode on your phone. This is done by pressing the   button on the phone